石塑電梯門套是由石塑線條和石塑uv板組合而成，整個電梯門套分為三個部分，兩個豎梁和一個橫梁。施工前先將電梯口的基礎做好，基礎的要求是平整，對于電梯和墻壁間的縫隙要用細木工板打基礎，也就是用細木工板支一個木頭盒子，用釘子和膠固定在電梯口的側板。那么下面就給大家來講解一下它的施工要領和材料特性吧。

The stone plastic elevator door frame is composed of stone plastic lines and stone plastic UV panels. The entire elevator door frame is divided into three parts, two vertical beams and one horizontal beam. Before construction, the foundation of the elevator entrance should be prepared, and the requirement for the foundation is to be flat. For the gap between the elevator and the wall, a wooden box should be supported with a wooden board, and fixed on the side panel of the elevator entrance with nails and glue. So let's explain its construction essentials and material characteristics to everyone below.

它的施工大概要領，就是用有機硅密封膠和泡棉膠粘?；A(chǔ)處理完后，然后根據現場尺寸，先把側板切出來，把泡棉膠先粘在板子上，然后用有機硅密封膠點粘，最后貼在細木工板上，對齊按壓平整即可；石塑線條要根據不同規格的切出一個45°角，然后用有機硅密封膠點粘，要同時與側板、對角對齊。這就是石塑電梯門套的一大特點，施工簡單，省時又省力。

The general construction method is to use organic silicone sealant and foam adhesive. After the basic processing is completed, according to the on-site size, cut out the side panel first, stick the foam adhesive onto the board, then use organic silicone sealant to stick it, and finally stick it onto the fine wood board, align and press it flat; The stone plastic line needs to be cut at a 45 ° angle according to different specifications, and then glued with organic silicone sealant, aligning with the side panel and diagonal at the same time. This is a major characteristic of stone plastic elevator door frames, which are easy to construct, time-saving, and labor-saving.

材料的主要特性有：

The main characteristics of materials are:

1、B1級防火，火燒時無毒無釋放，無黑煙

1. B1 level fire prevention, non-toxic and non releasing during fire, with no black smoke

2、產品標準化生產，現場裝配安裝快捷

2. Standardized production of products, fast on-site assembly and installation

3、耐酸性、耐堿性

3. Acid and alkali resistance

4、耐摩擦，易清潔，維護成本低

4. Friction resistant, easy to clean, and low maintenance cost

5、耐久性好，使用壽命長

5. Good durability and long service life

6、不需要龍骨體系，直接粘貼可節約相當大的成本，節省了安裝空間

6. No need for keel system, direct pasting can save considerable costs and installation space

7、石塑uv裝飾墻板易清潔

7. Stone plastic UV decorative wall panels are easy to clean

8、石塑uv板材比重1.0—1.7g/cm3，產品輕質，有利于減少建筑物的承重及抗震

8. The specific gravity of stone plastic UV board is 1.0-1.7g/cm3, which is lightweight and beneficial for reducing the load-bearing and seismic resistance of buildings

本文由濟寧電梯門套加工定制提供技術支持，更多的詳細精彩內容請點擊我們的網站http://jidihe.com，我們將會全心全意為您提供滿意的服務。

This article provides technical support for customized processing of Jining elevator door frames. For more detailed and exciting content, please click on our website http://jidihe.com We will wholeheartedly provide you with satisfactory service.